|
CO600.4 Orion Cobalt Stereo Amplifier
Cobalt amplifiers feature flexible frontends with variable x-overs,
selectable bass boost, remote gain control (remote included on mono amplifiers),
all poured into a small sleek and sexy industrial design... Tons of clean power
packed in a small package.
250 Watt - four-channel Class A/B amplifier with built-in fully variable
low-pass crossover. Equipped with remote gain, the CO600.4 is capable of
two-channel operation with a maximum power of 600 W when both the front and rear
bridged channels are driven into 4 ohm speaker loads.
Product
Features:
*
Small Proprietary Orion Industrial Design
with illuminated design detail
* High-level inputs with auto turn-on circuit
* Flexible frontends to accommodate a variety
of system configurations
* Excellent small signal parameters
Click
Here
for Larger Angled Image |
|
|
Specifications: |
|
Model |
CO600.4 |
|
Power Output in Watts RMS, 4 Ohms |
60 x 4 |
|
Power Output in Watts RMS, 2 Ohms |
75 x 4 |
|
Maximum power Output into 4 ohm |
600 x 1 |
|
Externally Bridgeable |
Yes |
|
Remote Gain Function |
No |
| Distortion at Rated Power |
< 0.9% THD+N |
| Frequency Response |
20Hz to 30kHz
+/-0.5dB |
| Linear Bandwidth |
20Hz to 20kHz
±3dB |
| Damping Factor |
> 100 |
| Input Sensitivity |
250mV - 8V |
| Input Impedance |
10kΩ |
| Fuse Type |
(2) 25 Amp ATC |
| Dimensions |
2.1" x 8.1" x 13.4" |
| Weight |
7.3 lbs. |
|
Crossover Section: |
| Low Pass Crossover |
Continuously variable/
2nd Order |
| Low Pass Frequency Range |
50Hz to 500Hz |
| Continuous 2Ω load 20Hz to 200Hz, < 0.1% THD, with input voltage
at 13.8VDC. |
|