DLPK Canbus Door Lock/Alarm
and Transponder Docking Interface

CANBUS INTERFACE CONTROL MODULE FOR MORE THAN 500 VEHICLE

The DLPK is a CAN Bus interface kit that is compatible with over 500 vehicle models from 2000 through 2008 right out of the box. This module is SELF LEARNING and requires no
firmware download but is still flashable and upgradeable. The DLPK’s primary function is to control the door locks, trunk, factory alarm, heated seats and other available options. The
module can also provide outputs for the remote starter in analog or D2D such as tach, hood
switch, door triggers, and trunk pin. The DLPK module can also work as a combo bypass and door lock interface kit on certain makes of vehicles such as Infiniti and Nissan including
push to start equipped models. W2W and
D2D ready.

* Functionality varies depending on the vehicle.
   See vehicle application guide for supported
   features.

 Hardware
 • Control Module
 • Wiring Harness
 • Installation Guide
 • 4 Pin D2D harness

 Optional RF Loop Secure Transponders:
 • RFLUB
 • RFLCH
 • RFLCHGM
 • RFLMIT3
 • RFLKIA2

 Same coverage as the XK01, XK02,
 XK03, XK05, XK06 and XK07

 Note: We will Flash any Xpresskit
 Transponder Free with Purchase Here