Model 650 5 Channel Amplifier

FEATURES:
Dual high speed MOSFET switching power supplies.
Complimentary bipolar output design
5 channel architecture supports single amp system designs.
Thermal, DC offset, reverse polarity and short circuit protection.
Dual continuously variable 12 dB/octave 2-way active crossovers.
Continuously variable 12 dB/octave low-pass crossover for subwoofer channel.
Remote subwoofer level control and switchable 8 dB bass eq function.
Variable input sensitivity optimizes match with different signal sources.
Gold-plated wire terminals and RCA connectors ensure maximum signal transfer.
Rugged one-piece extruded heat sink with insulated nylon mounting feet.

SPECIFICATIONS:
50 watts RMS per channel @ 4 ohm, 20 to 20,000 Hz,
< 0.08% THD+N @ 14.4 VDC

75 watts RMS per channel @ 2 ohm, 20 to 20,000 Hz,
< 0.1% THD+N @ 14.4 VDC

250 watts RMS (subwoofer channel) into 4 ohm,
< 0.08% THD+N @ 14.4VDC

350 watts RMS (subwoofer channel) into 2 ohm,
< 0.1% THD+N @ 14.4VDC

650 watts RMS (total system power ) into 2 ohm,
<0.1% THD+N @ 14.4VDC

Dynamic Power Rating (minimum load/14.4VDC)
800 watts

Signal-to-Noise Ratio
Greater than 95 dB

Frequency response
20-20000 Hz ± 0.5 dB

Damping Factor @ 4 ohm
> 100

Input Impedance
20 kohm

Input Sensitivity
variable from 150mV to 8 volts

Output Impedance
stable to 2 ohm

Supply Voltage
9 to 16 VDC

Heat Sink Dimensions (H x W x L)
2" x 8-3/4" x 14-15/16"