457C Chrysler/Jeep Databus Interface
Module

Databus door lock interface for late model Chrysler/Jeep models.

Key Features:
*Door Lock Interface Module
*interfaces with Factory Databus on many late
  model Chryslers, Jeeps and Dodges
*Eliminates need for measuring resistance
*Includes: (1) Control Module, (1) Installation
  Guide, (1) Wiring Harness.

NOTICE: To control locks in listed vehicles, you MUST tie into the door locks OR FAA/FAD (Factory alarm arm/Factory alarm disarm) wire of the vehicle.

If it does NOT have factory security you will tie the Analog 3 wire (Pink/Black) to the lock/unlock wire in the vehicle.

If it DOES have factory security, you will tie the Analog 2 wire (Pink) to the FAA/FAD (Factory alarm arm/Factory alarm disarm) wire in the vehicle.

The Brown wire on Connector 2 is only used for arming the factory alarm in the Liberty. You will tap into the drivers pin switch.