Model 250 2 channel amplifier

FEATURES:
High speed MOSFET switching power supplies
Complimentary bipolar output design
Stereo, mono, or simultaneous stereo/mono operation
Thermal, DC offset, reverse polarity and short circuit protection
Continuously variable 12 dB/octave 2-way active crossover
Switchable 8 dB bass eq function
Variable input sensitivity optimizes match with different signal sources
Gold-plated wire terminals and RCA connectors ensure maximum
signal transfer
Rugged one-piece extruded heat sink with insulated nylon mounting feet.
SPECIFICATIONS:

75 watts RMS per channel @ 4 ohm, 20 to 20,000 Hz,
< 0.08% THD+N @ 14.4 VDC

125 watts RMS per channel @ 2 ohm, 20 to 20,000 Hz,
< 0.1% THD+N @ 14.4 VDC

250 watts RMS bridged into 4 ohm, from 20 to 20,000 Hz
< 0.1% THD+N @ 14.4 VDC

Dynamic Power Rating: (minimum load/14.4VDC)
325 watts

Signal-to-Noise Ratio:
Greater than 95 dB

Frequency response:
20-20000 Hz ± 0.5 dB

Damping Factor @ 4 ohm:
> 200

Crossover range:
50 to 500 Hz

Input Impedance:
20 kohm

Input Sensitivity:
Variable from 150mV to 8 Volts

Output Impedance:
Stable to 2 ohm

Supply Voltage:
9 to 16 VDC

Heat Sink Dimensions (H x W x L):
2" x 8-3/4" x 9-13/16"